Paloma
A large system of PHH-32, 9.5.8.4 or 28c series Palomas can be electronically controlled with the MIC-185 Manifold Controller. For systems of 7 to 20 units, the MIC-185 Controller needs an extended communication board, the MICS-180, which can be fit inside the MIC-185 installation box.

The MIC-185 Controller is linked to each Paloma with a separate communication cable. Temperatures are set for the entire system by a single Main Controller (UMC-117), which is linked directly to the MIC-185. The Main Controller will also display diagnostic codes for each unit in the system.

The PHH-32, 9.5 or 28c Series is designed to meet the demands of high-volume hot-water applications, whether they need 8 gallons per minute or 80. In a residence, a multi-unit system may be needed to feed a multi-head shower system, whirlpools, or a Roman bath.  In commercial applications, we see this requirement at apartment complexes, hotels and campuses.

Systems controlled by the MIC-185 have the same minimum ignition flow as a single unit. In the 28c Series, this is just 0.66 GPM and in the 9.5.8.4 and PHH Condencing series, this is just 0.44GPM.  The MIC-185 Controller is also designed to maximize the life of the system by rotating the order of ignition and distributing heating load among the units.



The ICAD is a sophisticated system that monitors and optimizes combustion in the firing chamber, providing protection against Carbon Monoxide.
Learn more.
Sae up to $300 Home Energy Improvement Tax Credit
Everyone claims that their product is greener but few take the next step. Paloma is taking that step; we're seeking a solution to a serious and difficult issue. Paloma is ready to meet the challenge.
Learn more.

With any water heater, the trick is to make certain that you don't run out of hot water. View a complete comparison of features and benefits. Learn more.
Copyright © 2005 - 2008 Paloma Industries, Inc. All rights reserved. | Privacy | Site Map